RGB Pseudo Glow Tube Clock Nixie Tube DIY Kit LED

Overview:
This clock is designed according to the glow tube. Because the number of glow tubes on the market is getting less and less, the price is relatively expensive, the service life is not long, and the internal high voltage has safety hazards. We have designed this LED. The pseudo-glow tube clock, although it can not replace the retro glow tube, with low price, safe use, simple operation, it is worth buying a device.
You can customize the color you like, with 16 million colors to control, you can even define the color of each bit. We also designed five display modes for it, and the recharge is only between the fingers.
You can adjust the time/color/brightness with the buttons. You can also use your computer software to synchronize your time.
This is an RGB clock kit that needs to be assembled by itself. It seems to be simple in structure. It actually needs about 200+ parts, but the assembly is not difficult, because tearing off the protective film will take up most of your time. It is a very Creative DIY gift. The time only needs to be saved once. There is a battery on the motherboard to record the time. After saving, it can be plugged into any USB port. We will give a 5V USB charging head.

Specification:
Type: power module
Package: black walnut, spare parts are assembled by themselves
Application: 3C digital
common problem:
Q: Is this a clock? How do you look at the time?
A: This is a clock kit that needs to be assembled by yourself. For example, 183324 is 18:33:24.
Q: Is this clock charged or plugged in?
A: This clock is plugged in, and comes with USB power and data cables.
Q: Will it remember the time after power off?
A: There is a button battery on the motherboard, it will continue to run when power is off, and there is no need to reset the time when plugging in after power off.
Q: How does this clock adjust the time?
A: The button at the bottom of the clock can set the color/mode/time. You can also be lazy to synchronize time or set colors with computer software.
Q: Can the power bank be used for the power supply? How long can it be used?
A: Yes, it can be powered by any USB port. It consumes about 260ma of electricity, so it can only be used for 20-30 hours if you use a 10,000 mA battery charger.

Package Content:
1 Set Light